We use cookies and similar technologies on our website. You may consent to the collection and use described in our Privacy Notice and Cookie Notice, or you may disable or change how cookies are used by clicking on "Cookies Settings" below.

Cookies Settings

Privacy Preference Center

  • Your Privacy
  • Strictly Necessary Cookies
  • Performance Cookies
  • Functional Cookies
  • Targeting Cookies

Your Privacy

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.

More information

Fluke 1630-2 FC Earth Ground Clamp, 1000 V, 40 Hz to 1 kHz

1630-2 FC.webp

Part Number : 1630-2 FC

Brand : Fluke

Fast and safe, this earth-ground clamp measures indoor/outdoor earth-ground resistance and ac leakage currents without disconnecting the earth-ground stake from the grounding system. In addition, this clamp features a heavy-duty clamp jaw that stays in alignment and calibration in industrial conditions.

View all

$ 2599.99

Quantity In Stock
Description
Specifications
Downloads
Related products

Description

Fluke 1630-2 FC OffersEliminate the hazardous and time-consuming process of disconnecting parallel grounds with this earth-ground clamp capable of stakeless measurement. Additionally, this clamp saves time by recording and storing up to 32,760 measured values in memory at the set logging interval.FeaturesTest the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakesAC leakage current measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system–ideal for system troubleshootingRugged: Heavy-duty clamp jaw stays in alignment and calibration even in every day, on-the-job industrial environmentsAlarm threshold: User-defined high/low alarm limits, for rapid measurement evaluationBand-pass filter: Selectable band-pass filter function removes unwanted noise from the ac leakage current measurementLogging measurementsThe earth ground clamp saves time by automatically recording data at pre-set intervalsSaves up to 32,760 measurements in memory at the set logging intervalSaves time by recording and storing measured valuesWireless systemConnects the clamp with an app on your smartphone or tabletYou can save these measurements, and images to cloud storage and share with your teamMaximize uptime and make confident maintenance decisions with data you can trust and traceAccess baseline, historical and current measurements by assetShare your measurement data using video calls and emailsStakeless measurementThe clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes. With this test method, a two-process measurement is made around the earth ground wire or bus bar using the specially-designed jaw of the clamp. Auxiliary test stakes are not used at all. A known voltage is induced by the source in the clamp, and the current is measured by the sensor in the clamp. The tester automatically determines the earth loop resistance for this section of the earthing system.

Downloads

1630-2 FC.pdf

pdf
Download

Specifications

Maximum Voltage to Earth Ground
1000 V
Frequency Range
40 Hz to 1 kHz
Ingress Protection
IEC/EN 60529: IP30 with jaw closed
LCD
Digital reading: 9999 counts Refresh rate: 4/s
Overload Indication
OL
Display Reading Specification with Loop Resistance Standard
Input: 0.474 Ω, Minimum: 0.417, Maximum: 0.531 Input: 0.5 Ω, Minimum: 0.443, Maximum: 0.558 Input: 10 Ω, Minimum: 9.55, Maximum: 10.45 Input: 100 Ω, Minimum: 96, Maximum: 104
Data Logging
Capacity: Minimum of 32,760 measurements Interval: 1 second to 59 minutes and 59 seconds
Wireless Radio
Frequency range: 2412 to 2462 MHz Output power: <10 mW Radio frequency certification: FCC ID:T68-FBLE IC:6627A-FBLE
Safety
General: IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1 Measurement: IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V
Current Clamp for Leakage Current Measurements
IEC/EN 61557-13: Class 2, ≤30 A/m
Resistance to Earth
IEC/EN 61557-5
Effectiveness of The Protective Measures
IEC/EN 61557-16: cutoff frequency 20 kHz (-3 dB)
Electromagnetic Compatibility (EMC)
International: IEC/EN 61326-1: Portable Electromagnetic Environment CISPR 11: Group 1, Class B, IEC/EN 61326-2-2 Korea (KCC): Class A equipment (Industrial Broadcast and Communications Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Conductor Size
1.57" (40 mm) approximately
Temperature
Operating: 14 to 122°F (-10 to 50°C) Storage: -4 to 140°F (-20 to 60°C) Reference: 73°F ±9°F (23°C ±5°C) Coefficient: 0.15% X (specified accuracy)/°C (<64.4°F or >82.4°F [<18°C or >28°C])
Operating Humidity
Non condensing: <50°F (<10°C) ≤90% RH at 50 to 86°F (10 to 30°C) ≤75% RH at 86 to 104°F (30 to 40°C) ≤45% RH at 104 to 122°F (40 to 50°C) (Non condensing)
Altitude
Operating: 6561' (2000 m) Storage: 39370' (12,000 m)
Battery
Type: 4 x 1.5 V AA alkaline IEC/EN LR6 Life: More than 15 hours (In ground resistance measurement mode, with backlight turned off, and RF mode turned off)
Dimensions
11.1 x 4.1 x 1.9" (283 x 105 x 48 mm)
Weight
31 oz (880 g)

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Industrial Spare Logo

Industrial Spare
Typically replies within an hour

Industrial Spare
Hi there,

How can I help you?
+96566651231
×
Chat with Us