We use cookies and similar technologies on our website. You may consent to the collection and use described in our Privacy Notice and Cookie Notice, or you may disable or change how cookies are used by clicking on "Cookies Settings" below.

Cookies Settings

Privacy Preference Center

  • Your Privacy
  • Strictly Necessary Cookies
  • Performance Cookies
  • Functional Cookies
  • Targeting Cookies

Your Privacy

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.

More information

Solenoid Valve 1/4" 107 NC-IA Brass FKM(FPM) 0.15-15 Bar 220V AC

305608_1._Sol_107_2.jpg 8792238_2._Sol_107_1.jpg 5876830_3._Sol_107_3.jpg

Images may vary slightly

See specifications for accurate information.

Part Number : SOL-W-107V-04-EU/220VAC

Brand : ACL

This is a ACL Italy Indirect operating 2 way solenoid valve with G 1/4 inch threads and a 220 V AC coil. The valve has a brass housing with FKM(FPM) sealing and an orifice size of 10 mm. The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied. The valve is suitable for pressures of 0.15 - 15 bar (2 - 217 psi) and a ambient temperature according to coil from -10°C to +80°C and seal temperature range is -10°C to +140°C. The valve has a Kv-value of 1.5 m3/h, which translates to a flow rate of 25 l/min at a differential pressure of 0.15 bar (for water). In imperial units: Cv = 1.72, which means 1.72 GPM @ 1 psi pressure drop. For simple applications it is often enough to select a valve based on the thread size and orifice diameter.

View all
Quantity In Stock
Description
Specifications
Downloads
Related products

Description

This is a ACL Italy Indirect operating 2 way solenoid valve with G 1/4 inch threads and a 220 V AC coil. The valve has a brass housing with FKM(FPM) sealing and an orifice size of 10 mm. The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied. The valve is suitable for pressures of 0.15 - 15 bar (2 - 217 psi) and a ambient temperature according to coil from -10°C to +80°C and seal temperature range is -10°C to +140°C. The valve has a Kv-value of 1.5 m3/h, which translates to a flow rate of 25 l/min at a differential pressure of 0.15 bar (for water). In imperial units: Cv = 1.72, which means 1.72 GPM @ 1 psi pressure drop. For simple applications it is often enough to select a valve based on the thread size and orifice diameter. The brass housing is durable, suitable for neutral fluids and resistant to many chemicals. The FKM (fluoro rubber material) sealing is suitable for neutral fluids and many chemicals, but it has poor resistance to oils and fats. The valve has an IP65 rating if properly connected.

Pros:

  • Relatively large orifice (10.5 mm) for the compact body size
  • Solenoid valves open and close very fast compared to many other valve types
  • Delivered including coil and connector
  • Semi-direct operated valves work from 0 bar, which makes them suitable for low pressure or gravity fed systems, circulating closed circuits or even rough vacuums
  • EPDM is suitable for (hot) water, neutral fluids and many chemicals
  • Good protection against the environment thanks to the IP65 rating

Cons:

  • EPDM is not suitable for oils and fats
  • If your pressure differential is always higher than 0.5 bar, an indirect operated solenoid valve could be an alternative with a larger flow rate
  • Solenoid valves are very sensitive to dirt and can only be used with clean liquids and gases
  • Solenoid valves use energy while activated and the coil may get hot. A well ventilated installation environment is recommended to dissipate the heat

NC-IA series

The NC-IA valve is a indirectly operated, normally closed 2/2-way solenoid valve. The ST-SA series can be used from zero bar. The body is available in brass and stainless steel with an NBR, EPDM or FKM seal. The orifice is 10.5 mm for the brass valves, and 8 mm for the stainless steel valves. The ST-SA solenoid valves are compatible with all coils from the CS1-series. The valves are available with BSP or NPT threads on request.

Downloads

Datasheet.pdf

pdf
Download

Specifications

Connection size
Choose a connection size that matches the size of the pipe or hose it will be connected to. Alternatively, you can size the valve based on the Kv value for more accuracy.
1/4 inch
Connection type
Types of connection used for the valve ports.
Inner thread cylindrical BSPP-G
Function
The circuit function of a solenoid valve specifies how fluid will flow between the valve's ports when it is energized de-energized.
Normally closed
Voltage
Choose the voltage require to operate the valve.AC stands for alternating current, DC for direct current.
220V AC
Material
Choose a housing material that is not corroded by the media and environment , and can withstand the temperatures and pressures. Check out our chemical resistance chart.
Brass
Seal material
The choice mostly depends on chemical resistance, temperature and pressure ratings. Use our chemical resistance chart to search for compatibility with specific substances.
FKM(FPM)
Operation
The operating principle of the solenoid valve.
Indirect
Recommended for
Types of fluid or gas that the valve is recommended for.
Water, Air, Gas
Min pressure difference (bar)
Minimum pressure difference required for the valve to operate effectively. if the pressure difference is lower, the valve might not operate properly.
0.15
Max pressure (bar)
Maximum pressure difference between the inlet and outlet port.
15
Valve bore (mm)
The valve bore is the diameter of the orifice , which the media flows through. It has a high impact on the flow rate.
10
Kv value [m3/h]
Kv is a measure of the flow rate of water in m3/h at a pressure drop of 1bar. Use the Kv for your application. Imperial units: Cv=1.16xKv.
1.5
Ambient Temperature Range (°C)
The minimum temperature of the fluid at which the valve can operate continuously.
-10°C to +80°C
Seal Temperature Range (°C)
The maximum temperature of the fluid at which the valve can operate continuously.
-10°C to +140°C
Degree of protection (IP)
The ingress protection (IP) rating indicating the product's resistance to dust and water , crucial for outdoor or harsh conditions.
IP65
Nominal power (VA)
Rated power consumption of the valve .
8
Valve ports/positions
Number of ports and positions, e.g. 2/2-way means 2 port (in/out) and 2 positions (open/closed).
2/2 Way
Model
Choose a model.
107
Voltage-type
The type of voltage required for the solenoid valve to operate correctly. Common options include AC or DC voltage.
Alternating current (AC)
Brand
ACL Italy
Coil series and width(mm)
30E & 30mm
Electrical connection
DIN 46244

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Industrial Spare Logo

Industrial Spare
Typically replies within an hour

Industrial Spare
Hi there,

How can I help you?
+96566651231
×
Chat with Us