We use cookies and similar technologies on our website. You may consent to the collection and use described in our Privacy Notice and Cookie Notice, or you may disable or change how cookies are used by clicking on "Cookies Settings" below.

Cookies Settings

Privacy Preference Center

  • Your Privacy
  • Strictly Necessary Cookies
  • Performance Cookies
  • Functional Cookies
  • Targeting Cookies

Your Privacy

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.

More information

Fluke 2062 Advanced Pro Wire Tracer Kit, CAT IV 600 V, 600 V AC/DC

2062.webp

Part Number : 2062

Brand : Fluke

Built to keep you safe, this advanced wire tracer kit accurately and safely troubleshoots energized/de-energized wires in residential, commercial, and industrial environments up to CAT IV 600 V. In addition, this kit comes with a receiver with Smart Sensor, a transmitter, an AC current clamp, a test lead kit, and a carrying case.

View all

$ 3047.99

Quantity In Stock
Description
Specifications
Downloads
Related products

Description

Fluke 2062 OffersFast, easy, and safe troubleshooting, this advanced wire tracer kit features a CAT IV 600 V rating, offering the highest protection on any wire tracer. Spikes up to 8000 V can occur in industrial and utility environments, which is where this kit excels at protecting you from these dangerous levels of transient overvoltage. This protection is crucial for scenarios in environments like industrial plants, factories, and hospitals where critical equipment cannot be offline.FeaturesBuilt to keep you safeThe included receiver offers four tracing modesThe included transmitter offers three power modesTwo transmitter output frequencies: Automatically senses whether the system is energized or de-energized and selects a 6 or 33 kHz output frequencyEight receiver sensitivity levels: More sensitivity levels mean more flexibility and accuracy when tracingFaster, easier, and safer troubleshootingLocate energized and de-energized wires quickly and accuratelyFind breaks or opens and shortsIdentify breakers and fusesCAT IV 600 VSmarter tracing saves timeThe innovative Smart Sensor™ makes wire tracing faster and easier. It locates and displays energized wires within walls, floors, and ceilings on a high-resolution 3.5" (89 mm) TFT LCD color display. Embedded help screens on the display make use easy, whether you're a novice or an expert. While the tip sensor provides an audible tone when locating wires, the Smart Sensor helps visualize and pinpoint the orientation of energized wires, eliminating guesswork.Wire tracing customized for your applicationWhether troubleshooting electrical wiring and equipment in residential homes, commercial buildings, or high-voltage utility plants, this advanced wire tracer kit can find breaks or opens and shorts. Its different modes and functions give you the flexibility to troubleshoot a wide range of electrical wiring and circuitry problems you may encounter on the job.Four receiver tracing modesThe included receiver detects the signal in wires and cables using two methods: passive tracing without the transmitter for non-contact voltage detection and active tracing with the transmitter for all other modes. The receiver's tip sensor can trace wires in corners, tight spaces, and junction boxes.Smart sensor mode for energized wire detection and visualization on the large color LCDTip sensor mode for more precise detection of a wireBreaker mode for easy breaker and fuse identification based on the highest recorded signal detected from the transmitterNon-contact voltage detection mode to trace energized wires without the use of the transmitterThree transmitter power modesThe included transmitter works on energized and de-energized circuits up to CAT IV 600 V and features high, low, and loop modes. These modes change the strength of the induced signal and can help provide more accurate results, depending on the circuit you're tracing.High mode for normal energized and de-energized circuitsLow mode for precision tracing with a low signal to reduce coupling to nearby wires and metal objectsLoop mode for closed loop de-energized circuitsApplicationsWire and circuit tracingTroubleshooting electrical wiring and equipmentResidential homesCommercial buildingsHigh-voltage utility plantsIndustrial environmentsFactoriesHospitals

Downloads

2062.pdf_1.pdf

pdf
Download

Specifications

Measurement Category
CAT IV 600 V
Operating Voltage/Frequency
  • Voltage: 600 V AC/DC Frequency: Energized: 6.25 kHz De-energized: 32.768 kHz
  • Voltage: 600 V AC/DC Frequency: Energized/Loop: 6.25 kHz De-energized: 32.768 kHz
Signal Indications
  • Numeric, bar graph display, and audible beep
  • LEDs and audible beep
Response Time
  • Smart sensor: 500 ms Tip sensor (energized/de-energized): 500 ms NCV: 500 ms Battery monitoring: 5 seconds
  • Line voltage monitoring: 1 second Battery voltage monitoring: 5 seconds
Range Detection (open air)
Smart sensor direction indication mode ≤6" (15 cm), 230 V AC, high mode, sensitivity level 2 Tip sensor: Energized Maximum distance via air: Up to 20' (6.1 m) Pinpointing: Approximately 1.97" (5 cm) Tip sensor: De-energized Maximum distance via air: Up to 14.7' (4.5 m) Pinpointing: Approximately 1.97" (5 cm) NCV (40 to 400 Hz) Maximum sensitivity: 90 V up to 6.6' (2 m) Minimum sensitivity: 600 V up to 0.4" (1 cm)
Display
  • Size: LCD 3.5" (89 mm) Dimensions: 2.76 x 2.07" (70 x 52 mm) Resolution: 480 x 320 Type: Color TFT LCD Color: 16-bit Backlight: Yes
  • Size: LEDs Type: LEDs Color: Operating mode LEDs: Red Battery status LEDs: Green, yellow, red
Environmental
  • Operating temperature: -4 to 122°F (-20 to 50°C) Operating humidity: 45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C) 95% (non-condensing): 50 to 86°F (10 to <30°C) 75%: 86 to <104°F (30 to <40°C) Operating altitude: 6261' (2000 m) Pollution degree: 2 IP rating: IP40 Drop test: 3.28' (1 m)
  • Operating temperature: -4 to 122°F (-20 to 50°C) Operating humidity: 45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C) 95% (non-condensing): 50 to 86°F (10 to <30°C) 75%: 86 to <104°F (30 to <40°C) Operating altitude: 6261' (2000 m) Transient protection: 8 kV (1.2/50 µS surge) Pollution degree: 2 IP rating: IP40 Drop test: 3.28' (1 m)
Power
  • Type: 4 x AA (alkaline) Consumption (typical): 110 mA Battery life: Approximately 20 hours Low battery indicator: Yes
  • Type: 8 x AA (alkaline) Consumption (typical): High/low mode: 70 mA Loop mode with clamp: 90 mA Consumption without signal transmission: 10 mA Battery life: High/low mode: Approximately 25 hours Loop mode: Approximately 18 hours Fuse: 1.6 A, 700 V, fast-acting, Ø0.2 x 1.3" (Ø6 x 32 mm), 50 kA interrupt Low battery indicator: Yes
Dimensions
  • Approximately 10.92 x 4.43 x 2.55" (277 x 112 x 65 mm)
  • Approximately 7.2 x 3.66 x 1.97" (183 x 93 x 50 mm)
Weight
  • Approximately 1.2 lbs (0.55 kg)
  • Approximately 1.25 lbs (0.57 kg)
Current Output of Signal (typical)
Energized circuit: High mode: 60 mA rms Low mode: 30 mA rms De-energized circuit: High mode: 110 mA rms Low mode: 40 mA rms Loop mode with test leads: 160 mA rms Loop mode with AC current clamp: 385 mA rms
Signal Voltage Output (nominal)
Energized circuit: High mode: 14 W at 230 V AC/50 Hz, 3.33 kΩ at 230 V AC Low mode: 4.6 W at 230 V AC/50 Hz, 11.5 kΩ at 230 V AC De-energized circuit: High mode: 31 Vrms, 140 Vp-p, 0.86 W at 1 kΩ load Low mode: 27.5 Vrms, 120 Vp-p, 0.1 W at 1 kΩ load Loop mode with test leads: 32 Vrms, 140 Vp-p, 0.87 W at 1 kΩ load Loop mode with AC current clamp: 31 mV, 0.89 W at 1 Ω load

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Industrial Spare Logo

Industrial Spare
Typically replies within an hour

Industrial Spare
Hi there,

How can I help you?
+96566651231
×
Chat with Us