We use cookies and similar technologies on our website. You may consent to the collection and use described in our Privacy Notice and Cookie Notice, or you may disable or change how cookies are used by clicking on "Cookies Settings" below.

Cookies Settings

Privacy Preference Center

  • Your Privacy
  • Strictly Necessary Cookies
  • Performance Cookies
  • Functional Cookies
  • Targeting Cookies

Your Privacy

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.

More information

3/2 Way NC Pneumatic Solenoid Valve 1/4'' NPT 230V AC 0.9 -10 bar

9659981_output_webp_image_new_2.webp 8908264_output_webp_image_new_1.webp 7664696_output_webp_image_new_3.webp 4043441_output_webp_image_new_4.webp 6273519_output_webp_image_new_5.webp

Image may vary slightly

See specifications for accurate information.

Part Number : VUVS-L25-M32C-G14-3W

Brand : Festo

3/2 way (normally closed) pneumatic solenoid valve from Festo with 1/4'' NPT inch ports (female thread) and 230 V AC coil. Indirect operated (internally piloted). Applications include controlling a single-acting cylinder. Operating pressure from 0.9 -10 bar (13 to 145 psi). Only suitable for air. With manual override control. Can be mounted on manifold with central air supply/vent. Response time 0.055 s, Kv-value 33 Nm³/h. (550 l/min).

The valve plug is not included.

View all
Quantity In Stock
Description
Specifications
Downloads
Related products

Description

This valve is 3/2 way, normally closed, equipped with one coil. The valve has 1/4'' NPT inch ports (BSPP female thread). The coil voltage is 230 V AC and the power is 0.95 VA. The valve can only be operated with compressed air (filtered up to 5 μm) that doesn't need to be lubricated. The operating pressure is 0.9 to 10 bar (13 to 145 psi). Mounting on manifold with a central supply and vent possible. Response time is 0.055 s. The valve has a Kv flow rate value is 33 Nm³/h(550 l/min). This valve is equipped with a manual override. Never exceed the valve limits (pressure, temperature, voltage, media, etc.). Do not apply any voltage to the coil when the coil is removed from the valve in order to prevent burn-through.

A 3/2-way valve has three ports and two states. It can be used to control a single-acting cylinder, among other applications. The valve's ports and functions are described as follows:.

  • Port 1 (Supply Port): This is the port where the compressed air supply connects. It supplies air to the valve.
  • Port 2 (Actuator Port): This port connects to the actuator (e.g., a cylinder). It is used to either fill or vent the actuator, depending on the state of the valve.
  • Port 3 (Exhaust Port): This port vents the air from the actuator back to the atmosphere.

Pros:

  • Low flow resistance (Kv=33 Nm³/h.)
  • Fast and reliable operation
  • Duty Cycle 100%
  • Low energy consumption (0.95VA)
  • Maintenance free design
  • Coil can be installed in four directions (4 x 90°)
  • Designed for manifold mounting

Cons:

  • Only for (clean) air, not for other media or vacuum
  • Minimal pressure of 0.9 bar required for proper operation (pilot operated valve)

Downloads

Data Sheet-Air solenoid valve VUVS-20_6569.pdf

pdf
Download

Specifications

Seal material
The choice mostly depends on chemical resistance, temperature and pressure ratings. Use our chemical resistance chart to search for compatibility with specific substances.
NBR (nitrile rubber)
Voltage-type
The type of voltage required for the solenoid valve to operate correctly. Common options include AC or DC voltage.
230V AC
Operation
The operating principle of the solenoid valve.
Indirect
Pressure (bar)
0.9 bar to 10 bar
Standard nominal flow rate
550 l/min
Temperature (°C)
-10 °C to 60 °C
Valve size
21mm
Actuation type
Electrical
Degree of protection (IP)
IP 65
Valve function
3/2, closed, monostable
Valve ports/positions
Number of ports and positions, e.g. 2/2-way means 2 port (in/out) and 2 positions (open/closed).
3/2 way
Brand
Festo

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Industrial Spare Logo

Industrial Spare
Typically replies within an hour

Industrial Spare
Hi there,

How can I help you?
+96566651231
×
Chat with Us