Wika Pneumatic Hand Test Pump, CPP10-H, To 10 Bar [145 Psi]
Part Number : CPP10-H
Brand :
![WIKA]()
Hand test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These pressure tests can take place in the laboratory or workshop, or on-site at the measuring location.
View all
Description
Hand test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These pressure tests can take place in the laboratory or workshop, or on-site at the measuring location. If a instrument to be tested and a sufficiently accurate reference measuring instrument are connects to the hand test pump, on actuating the pump, the same pressure will act on both measuring instruments. By comparison of the two measured values at any given pressure value, a check of the accuracy and/or adjustment of the pressure measuring instrument under test can be carried out. In order to approach the measuring points exactly, the hand test pump features a fine adjustment valve. The CPP10-H is a pneumatic hand test pump for low-pressure ranges up to 10 bar [145 psi], with switching to vacuum generation down to -0.85 bar [-25 inHg]. The maximum pressure or vacuum achievable is dependent upon the connected test volume. Through the smooth pressure generation and the integrated fine adjustment valve, very small positive or negative pressures in the mbar range can be set safely and precisely. Via a T-connector with a hose connection, the test item and the reference measuring instrument can be easily
Special Features
• Simple test pressure generation on-site, in the laboratory or in the workshop
• Supply of small positive or negative pressures
• Specifically for testing, adjustment and calibration of low-pressure measuring instruments in the areas of: heating, ventilation and air-conditioning technology, cleanroom engineering, medical engineering and filtration and dust removal technology
Related Products
![]()
![Image Brand]()
Wika Pneumatic Hand Test Pump, CPP10-H, To 10 Bar [145 Psi]
Part Number : CPP10-H
![]()
![Image Brand]()
Wika Pneumatic Hand Test Pump, CPP30, To 35 Bar [500 Psi]
Part Number : CPP30
![]()
![Image Brand]()
Wika Hydraulic Hand Test Pump, CPP1000-H, CPP700-H, To 1,000 Bar [14,500 Psi]
Part Number : CPP1000-H, CPP700-H
![]()
![Image Brand]()
Wika Hydraulic Hand Spindle Pump, CPP1000-L, CPP1000-M, To 1,000 Bar [14,500 Psi]
Part Number : CPP1000-L, CPP1000-M
Wika Pneumatic Hand Test Pump, CPP10-H, To 10 Bar [145 Psi]
Part Number : CPP10-H
Wika Pneumatic Hand Test Pump, CPP30, To 35 Bar [500 Psi]
Part Number : CPP30
Wika Hydraulic Hand Test Pump, CPP1000-H, CPP700-H, To 1,000 Bar [14,500 Psi]
Part Number : CPP1000-H, CPP700-H
Wika Hydraulic Hand Spindle Pump, CPP1000-L, CPP1000-M, To 1,000 Bar [14,500 Psi]
Part Number : CPP1000-L, CPP1000-M
LEGAL DISCLAIMER
All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.
