Fluke 87V/IMSK Industrial Multimeter Service Combo Kit with current clamp, 1000 V, 10 A
Part Number : 87V/IMSK
Brand :
![Fluke]()
Troubleshoot any electrical system with this industrial multimeter service combo kit featuring a low-pass filter capable of capturing intermittents as quickly as 250 ?S and for accurate measurements on VFDs. In addition, this kit includes a current clamp, a temperature probe, a test lead set, and an alligator clip set.
View all
KWD 148.150
Quantity
Description
Specifications
Downloads
Related
products
Description
Fluke 87V/IMSK OffersEfficient and safe, this industrial multimeter is designed to withstand spikes higher than 8000 V and features an audible warning if test leads are placed in the wrong input jacks. In addition, this multimeter includes an analog bar graph and a removable holster with storage for the test lead and probe.True-rms accuracy and advanced functionality to give you the results you needTrue-rms accuracy with manual and automatic ranging, display hold, auto hold, and minimum/maximum-average recordingEfficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locationsA low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 ?SThe current clamp turns the multimeter into a clamp meterThe current clamp provides accurate current measurements up to 400 A AC without breaking electric circuitsAllows taking measurements safely with industry standard safety ratingsSelect accessories like temperature probe, test leads and alligator clipsTemperature probe plugs into the multimeters voltage jacks and allows temperature measurements from -40 to 500°F (-40 to 260°C)Test leads and alligator clips complete this versatile kitKey safety featuresSafety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the jobDesigned to withstand spikes of more than 8000 V; audible input alert warning against wrong use of input jacksApplicationsMotor drivesPlant automationPower distributionElectromechanical equipment
Downloads
Specifications
Voltage
Choose the voltage require to operate the valve.AC stands for alternating current, DC for direct current.
DC:
Maximum voltage: 1000 V
Accuracy: ±(0.05% + 1)
Maximum resolution: 10μV
AC:
Maximum voltage: 1000 V
Accuracy: ±(0.7% + 2) True RMS
AC bandwidth: 20 kHz with low pass filter; 3 dB at 1 kHz
Maximum resolution: 0.1 mV
Current
DC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(0.2% + 2)
Maximum resolution: 0.01μA
AC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(1.0% + 2) True RMS
Maximum resolution: 0.1μA
Resistance
Maximum resistance: 50 MΩ
Accuracy: ±(0.2% + 1)
Maximum resolution: 0.1 Ω
Capacitance
Maximum capacitance: 9,999 μF
Accuracy: ±(1% + 2)
Maximum resolution: 0.01 nF
Frequency
Maximum frequency: 200 kHz
Accuracy: ±(0.005% + 1)
Maximum resolution: 0.01 Hz
Duty Cycle
Maximum duty cycle: 99.9%
Accuracy: ±(0.2% per kHz + 0.1%)
Maximum resolution: 0.1%
Range: Accuracy within ±(0.2% per kHz + 0.1%)
Temperature
Measurement: -328 to 1994°F (-200 to 1090°C) excluding probe
Operating: 68 to 131°F (-20 to 55°C)
Storage: -40 to 140°F (-40 to 60°C)
80 BK Temperature Probe
-40 to 500°F (-40 to 260°C), 35.96°F (2.2 °C) or 2% whichever is greater
Conductance
Maximum conductance: 60.00 nS
Accuracy: ±(1% + 10)
Maximum resolution: 0.01 nS
Diode
Range: 3 V
Resolution: 1 mV
Accuracy: ±(2% + 1)
AC Current Clamp
Nominal current range: 400 A
Continuous current range: 1 to 400 A
Maximum non-destructive current: 1000 A
Lowest measurable current: 1 A
Basic accuracy: 2% + 0.06 A, 45 to 400 Hz, % reading + floor spec
Useable frequency: 5 to 20 kHz
Output level(s): 1 mA/A
Safety: CAT IV 600 V, CAT III, 1000 V
Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010
Maximum conductor diameter: 1.25" (32 mm)
Maximum conductor size (busbar): 750 MCM
Output cable length: 59" (1.5 m)
Shrouded banana plugs: Yes
Humidity (without condensation)
0 to 90% (32 to 95°F [0 to 35°C])
0 to 70% (95 to 131°F [35 to 55°C])
Operating Altitude
6561.68' (2000 m)
Overvoltage category
EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency approvals
CE, CSA, RCM
Display
Digital: 6000 counts updates 4/seconds, 19,999 counts in high-resolution mode
Analog: 32 segments, updates 40/seconds
Frequency: 19,999 counts, updates 3/seonds at > 10 Hz
Shock
3.28' (1m) drop per IEC 61010-1:2001
Vibration
Per MIL-PRF-28800 for a Class 2 instrument
Power
Alkaline approximately 400 hours typical, without backlight
Dimensions
7.9 x 3.8 x 2" (201 x 98 x 52 mm) (with holster)
Weight
0.78 lbs (355 g)
With holster: 1.37 lbs (624 g)
Related Products
![]()
![Image Brand]()
Fluke 116/323 HVAC/R Combo Kit
Part Number : 116/323-KIT
![]()
![Image Brand]()
Fluke 117/323-KIT Electricians Multimeter Combo Kit
Part Number : 117/323-KIT
![]()
![Image Brand]()
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Part Number : 87VMAX-PVLEAD1
![]()
![Image Brand]()
Fluke 1587FC Insulation Multimeter Kit
Part Number : 1587 FC-KIT
Fluke 116/323 HVAC/R Combo Kit
Part Number : 116/323-KIT
Fluke 117/323-KIT Electricians Multimeter Combo Kit
Part Number : 117/323-KIT
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Part Number : 87VMAX-PVLEAD1
Fluke 1587FC Insulation Multimeter Kit
Part Number : 1587 FC-KIT
LEGAL DISCLAIMER
All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.
