ISO 15552 Double Acting Pneumatic Cylinder 40-200mm - Magnetic - Damping - Stainless Steel

Images may vary slightly

Part Number : CRDNG-40-200-PPV-A

Brand :

This is a double acting ISO 15552 pneumatic cylinder with a Ø40 mm bore and 200 mm stroke. The operating pressures is 0.6 bar to 10 bar (8.702 to 145.038 psi).The cylinder is self-lubricating and has adjustable damping and has a magnetic piston for position sensing. The end rod thread size is M12 x 1.25. Wide range of mounting accessories available. The cylinder head, foot and tube are made from 304 stainless steel and the piston rod is made from 316 stainless steel. Suitable for temperatures of -20 to 80 °C.

View all

Quantity In Stock

Description

Specifications

Downloads

Related products

Description

This pneumatic cylinder is double acting, meaning it requires air pressure to extend and retract the rod. The cylinder adheres to ISO 15552 (replaces VDMA 24562 and ISO 6431), which is a globally accepted and widely used standard. The advantage is that it enables world-wide inter-changeability with other major brands such as SMC or Norgren. The bore size is 40 mm and it has a stroke length of 200 mm. This cylinder has an operating pressure of 0.6 bar to 10 bar (8.702 to 145.038 psi). The piston rod has a M12 x 1.25 threads at the end. The piston contains a magnetic element. This allows precise position feedback of the rod location by mounting (one or more) magnetic sensors, such as reed or hall sensors. The damping on the both ends of the stroke is adjustable with set screws. The cylinder has two G 1/4 inch ports for the air routing. The cylinder can be mounted rigid or flexible with a wide range of mounting options, such as rod swivel joint ends (ISO 8139) or rod fork ends. The cylinder head, foot and tube are made from 304 stainless steel and the piston rod is made from 316 stainless steel. The Airtec ISO 15552 cylinders are compatible with the following product series: Asco G453, Aventics PRA, Festo DSBC, IMI Norgren PRA, Parker P1D, Parker P1F and the SMC CP96 series.

Pros:

ISO 15552 is globally accepted and interchangeable with other major brands
Suitable for aggressive or wet environments thanks to the stainless steel design
Double acting cylinders can apply pressure in two directions and offer more motion control than single acting cylinders
The end of the rod stroke can be adjusted for damping
The cylinder is self lubricating and requires little maintenance

Cons:

Not suited for icy conditions

Downloads

CYLINDER PDF 1_7376.pdf

pdf

CLINDER PDF 2_3167.pdf

pdf

Specifications

Piston diameter (mm)

40

Stroke (mm)

200

Mode of operation

Double-acting

Pressure (bar)

0.6 bar to 10 bar

Rod thread

M12

Temperature (°C)

-20 °C to 80 °C

Seal material

TPE-U(PU)

Material

High-alloy stainless steel

Brand

Festo

Cushioning

Elastic cushioning rings/plates at both ends

Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke

754 N

Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke

633 N

Magnetic

Yes

Cylinder ISO standard

ISO 15552

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Chat with Us