Fluke FLUKE-117/PRV240 Digital Multimeter and Proving Unit Kit
Part Number : FLUKE-117/PRV240
Brand :
The digital multimeter and proving unit kit can be used on several measurements. The digital multimeter includes integrated non-contact voltage detection and Auto Volts and LoZ functions while the proving unit easily and safely verifies test tools. This combination is portable and brings accuracy and safety in the workplace.
View all
$ 352.34
Quantity
In Stock
Description
Specifications
Related
products
Description
Fluke 117/PRV240 Offers The digital multimeter includes integrated non-contact voltage detection to help get the job done faster Ideal for applications such as commercial buildings, hospitals, and schools, this multimeter comes equipped with True-RMS. This instrument helps prevent false readings caused by ghost voltage due to integrated non-contact voltage detection, Auto Volts, and LoZ functions. Additionally, this tool comes supplied with min/max/average readings and measures frequency, capacitance, and an easy-to-use interface. Engineered and tested with your safety on the job in mind Tested for safe use in CAT III 600 V environments and designed in several features to make it easier and faster for you to get the measurements you need. Features VoltAlert™ technology for non-contact voltage detection AutoVolt automatic ac/dc voltage selection LoZ: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas True-rms for accurate measurements on non-linear loads Measures 10 A (20 A overload for 30 seconds) Resistance, continuity, frequency and capacitance Min/max/average to record signal fluctuations Compatible with optional magnetic hanger (ToolPak™) for hands free operation Accurate and easy-to-use Provides low input impedance to help prevent false readings due to ghost voltage CAT III 600 V safety rated Applications Commercial buildings Hospitals Schools Fluke PRV240 Proving Unit Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked. Features Sources both AC and DC steady-state voltage - supplies 240 V DC/AC A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact Long battery life - 5000 tests per set of four AA batteries Test before touch Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of "Test Before Touch" (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. Designed for safety and compliance Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit. Applications Test and measurement
Specifications
DC Millivolts
Range: 600.0 mV
Resolution: 0.1 mV
Accuracy: ±0.5% of reading + 2 counts
DC Volts
Range: 6.000 V, 60.00 V, 600.0 V
Resolution: 0.001 V, 0.01 V, 0.1 V
Accuracy
±0.5% of reading + 2 counts
Continuity
Range: 600 Ω
Resolution: 1 Ω
Accuracy: Beeper on <20 Ω off> 250 Ω; detects opens or shorts of 500 µs or longer
Maximum voltage between any terminal and earth ground: 600 V
Surge Protection
6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Fuse for A Input
11 A, 1000 V FAST Fuse
Display
Digital: 6000 counts, updates 4/sec
Bar Graph
33 segments, updates 32/sec
Temperature
Operating: 14 to 122°F (-10 to 50°C)
Storage: -40 to 140°F (-40 to 60°C)
Output voltage: 240 V AC RMS or DC
±10 % ≥1 MΩ
Output voltage: LoZ >3 kΩ load
60 V AC typical; 50 V AC RMS minimum
LED Power Indicator
Turns on when output voltage is present
Battery
4 x AA Alkaline batteries NEDA (24 A IEC LR03)
Battery Life
5000 (5-second duration) test cycles with >1 MΩ load, 300 tests minimum with >3 kΩ load
Operating Temperature
14 to 122°F (-10 to 50°C)
Operating Humidity
0 to 90% (0 to 35°C)
Operating Altitude
6561.68' (2000 m)
Safety
IEC61010-1, IEC61010-2-030
Certification
CSA-CUS, CE
Dimensions
4.6 x 2.9 x 1.1" (11.7 x 7.4 x 2.8 cm)
Weight
8 oz (0.23 kg) includes batteries
Related Products
Fluke 116/323 HVAC/R Combo Kit
Part Number : 116/323-KIT
Fluke 117/323-KIT Electricians Multimeter Combo Kit
Part Number : 117/323-KIT
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Part Number : 87VMAX-PVLEAD1
Fluke 1587FC Insulation Multimeter Kit
Part Number : 1587 FC-KIT
Fluke 116/323 HVAC/R Combo Kit
Part Number : 116/323-KIT
Fluke 117/323-KIT Electricians Multimeter Combo Kit
Part Number : 117/323-KIT
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Part Number : 87VMAX-PVLEAD1
Fluke 1587FC Insulation Multimeter Kit
Part Number : 1587 FC-KIT
LEGAL DISCLAIMER
All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.
