We use cookies and similar technologies on our website. You may consent to the collection and use described in our Privacy Notice and Cookie Notice, or you may disable or change how cookies are used by clicking on "Cookies Settings" below.

Cookies Settings

Privacy Preference Center

  • Your Privacy
  • Strictly Necessary Cookies
  • Performance Cookies
  • Functional Cookies
  • Targeting Cookies

Your Privacy

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.

More information

Fluke 190-062-III Color ScopeMeter, 60 MHz, 2 channels

190-062-III.webp

Part Number : 190-062-III

Brand : Fluke

Effortlessly diagnose, view, and capture complex waveforms, induced noise, intermittent events, signal fluctuations, or drift with this high-performance portable oscilloscope. Rugged and easy to use, this oscilloscope features a bright color display, two channels, and a bandwidth of 60 MHz.

View all

$ 4313.99

Quantity In Stock
Description
Specifications
Downloads
Related products

Description

Fluke 190-062-III OffersAccurate and versatile, this portable oscilloscope provides a fast sampling rate of up to 5 GS/s, a 200 ps resolution, and deep memory of 10,000 samples per channel. Perform timing or amplitude-related measurements on three phases or three-axis control systems, or compare and contrast multiple test points in a circuit under test. Features Up to four independent floating isolated inputs, up to 1000 V Up to 5 GS/s real time sampling (depending on model and channels used) Deep memory: 10,000 points per trace waveform capture (scope mode) CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments Up to seven hours of battery operation using BP291 Large, bright color display is easy to view in nearly any environment Easy to store and view historical data and transfer to a PC via USB or Wifi Convenient battery access door for quick battery swaps in the field IP51 rating, dust and drip-proof Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals Frequency spectrum using FFT-analysis Automatic capture and REPLAY of 100 screens ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis TrendPlot Paperless Recorder mode with deep memory for longterm automatic measurements 5000 count DMM included in the 2-channel models Applications Microelectronics Troubleshooting Measure from mV to kV safely Independently isolated inputs allow you to make measurements in mixed circuits having different ground references reducing the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. ScopeMeter 190 Series III test tools are engineered to cover a wide application range from mV to kV, so you’re ready for anything from microelectronics to heavy duty higher voltage electrical applications. 190 Series III 60 MHz and 100 MHz configurations include VPS421 100:1 probes for higher voltage applications, while the 200 MHz and 500 MHz configurations include VPS410-II 10:1 probes suitable for both microelectronics and higher voltage applications. IP-51 rated for harsh environments Rugged and shock-proof, ScopeMeter Test Tools are built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time you reach for ScopeMeter Test Tool you can be confident it will work reliably wherever your work takes you. USB and Wi-Fi connectivity The 190 Series III offers two USB ports, electrically isolated from measurement input circuits allowing you to quickly and easily transfer data to a PC, archive and share waveforms with OEMs, colleagues and support staff, or store waveforms, screen captures and instrument setups onto USB memory devices for later use. Easily transfer saved files via USB stick, direct connection via the USB interface or optional Wi-Fi connectivity. These files can be used for further data handling or in FlukeView-2 Software to study waveforms in greater detail. Connect-and-View triggering Connect-and-View triggering provides an instant, stable display without the need for adjusting settings. If you’ve used other scopes, you know how tricky triggering can be. If settings are incorrect, results can be unstable or incorrect. Connect-and-View automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable and repeatable display of virtually any signal including motor drive and control signals. It’s especially fast and convenient when you’re measuring a number of test points in rapid succession. Built-in digital multimeter Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter on two channel 190 Series III models. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors. TrendPlot paperless recorder— records up to 11 days to help you find intermittent faults The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, dips, swells and interruptions, or the starting and stopping of a motor can also cause a machine to stop. You may not be around when it happens, but the 190 Series III ScopeMeter Test Tool will be. Plot minimum and maximum peak values and average over time Plot any combination of up to four readings including voltages, amps, temperature, frequency and phase for all inputs, all with time and date stamp to pinpoint faults

Downloads

Fluke_Scope_Meters_Datasheet_3.pdf

pdf
Download

Specifications

Number of Channels
2
Bandwidth
60 Mhz
Rise Time
5.8 ns
Channel Architecture
All inputs fully insulated from each other and from ground Inputs may be activated in any combination
Input Coupling
AC or DC, with ground level indicator
Input Sensitivity
With 10:1 probe, 20 mV to 1000 V/div With 100:1 probe, 200 mV to 10 kV/div Direct (1:1), 2 mV to 100 V/div
Bandwidth Limiter
20 MHz and 10 kHz
Polarity
Normal, inverted, variable
Vertical Resolution
8 bit
Accuracy at 4 s to 10 μs/div
5 mV/div to 100 V/div, ±(1.5% + 6 counts) 2 mV/div, ±(1.5 % + 10 counts)
Input Impedance
1 MΩ (±1 %) // 15 pF (±2.25 pF)
Rated Maximum Floating Voltage
CAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level)
Probe Input Voltage VPS410-II
CAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead)
Probe Input Voltage VPS421
CAT III 1000 V / CAT IV 600 V (maximum voltage between probe tip or reference lead to GND, 2000 V max between probe tip and reference lead)
Maximum BNC Input Voltage
CAT IV 300 V (maximum voltage on BNC input directly)
Memory Locations (Internal)
30 waveform memories plus 10 recording memories plus 9 screen copy memories
30 Waveform Memories
Each memory can contain up to 2 or 4 waveforms plus corresponding setups
10 Recording Memories
Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
External Data Storage
On PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
Screencopies
On PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
Volatility
Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
Real-Time Clock
Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Design
Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard Kensington lock supported to lock down instrument when left unattended
Drip and Dust Proof
IP 51 according to IEC60529
Shock and Vibration
Shock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (random), according to MIL-PRF-28800F Class 2
Display Size
5.3 x 3.5" (133 x 90 mm) LCD
Resolution
1120 x 765 pixels
Brightness
User-adjustable, up to 300 cd/m2
Temperature
Operating: battery discharging: 32 to 104°F (0 to 40°C); battery charging: 0 to 40°C (32 to 104°F) Storage: -4 to 140°F (-20 to 60°C)
Humidity
32 to 50°F (0 to 10°C): noncondensing 50 to 86°F (10 to 30°C): 95% (±5%) 86 to 104°F (30 to 40°C): 75% (±5%) 104 to 122°F (40 to 50°C): 45% (±5%)
Maximum Operating Altitude
CAT IV 600 V, CAT III 1000 V: up to 6600' (2000 m) CAT IV 300 V, CAT III 600 V, CAT II 1000 V: up to 13000' (4000 m)
Maximum Storage Altitude
40,000' (12 km)
Interfaces
Two USB-ports provided Ports are fully insulated from instrument's floating measurement circuitry USB-host port directly connects to external flash memory drive (up to 32 GB) for storage of waveform data, measurement results, instrument settings and screen copies Alternatively, this USB-A port may be used to connect a WiFi Adapter for wireless PC connectivity A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
Probe Calibration Output
Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel Generator output: 1.225 Vpp / 500 Hz square wave
Line Power
Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100 VAC to 240 VAC, ±10%, 50 to 60 Hz
Battery
Power: re-chargeable Li-Ion battery; battery swappable through easily accessible battery door at the rear of the instrument Type: BP291: 10.8V, 5000 mAh Charge indicator: battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen Operating time (with backlight low): Up to 7 hours using BP291 (included) Charging time: five hours for BP291 Power saving functions: Auto ‘power down' with adjustable power down time; automatic ‘display off' with adjustable power down time; on-screen battery power indicator
Dimensions
10.5 x 7.6 x 2.8" (265 x 192 x 70 mm)
Weight
4.6 lbs (2.1 kg)

LEGAL DISCLAIMER

All products are 100% genuine and legally purchased from authorized sources. Indspare is not an authorized dealer, agent or affiliate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.indspare.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website.

Industrial Spare Logo

Industrial Spare
Typically replies within an hour

Industrial Spare
Hi there,

How can I help you?
+96566651231
×
Chat with Us